PL-16 PL-20 PL-25 PL-26

Feature:

HEAVY DUTY CONSTRUCTION THROUGHOUT

• All structural parts are manufactured from high- quality Mechanize cast iron and stress relieved for deformation-free results.
• The 45° slant bed construction assures maximum stability in heavy duty operations. It also allows for convenient chip disposal.
• Square ways on X and Z-axes are hardened and precision ground.
• Saddle and mating surfaces between slide and slide ways are coated with wear-resistant media and then precision scraped.
• Exclusively designed saddle movement on Z- axis . Unlike the conventional movement method that employs the upper slide way as the reference slider way, this machine employs double inside slideways as reference slideways. The special design shortens the distance between the reference slideways and the cutting position therebyreducing torque generated by the cutting force. It not only upgrades the cutting rate by up to 20 M/min but also assures outstanding heavy cutting capabilities and maximum stability for the saddle slide movement.

HYDRAULIC TURRET

• Choice of 8 , 10 and 12 position turret .
• The hydraulic turret features the shortest route random tool selection.
• Bi-directional tool indexing for quick tool change .
• The hydraulic turret accommodates I.D. and O.D. tools for turning intricate parts.
• Heavy duty turret construction assures maximum rigidity and stability.

3-JAW HYDRAULIC CHUCK The 3-jaw hydraulic chuck is standard equipment and comes with hard and soft jaws	COOL SYSTEM The coolant system delivers high pressure coolant to flush chips and extend tool service life.	HYDRAULIC TAILSTOCK The rigid tailstock is locked on the bed firmly. The tailstock quill movement is driven by hydraulic power for convenient operations.

			KM-1100 KM-1300 KM-1680

Linear way

			KM-850L KM-1020L KM-1300L KM-1500L

Feature

In today’s competitive environment, the only way for competitive edge is to pursue efficiency and quality. PRIMERO high speed CNC Vertical Machine Center is just designed engineered with highefficiency and high accuracy in mind. The series of  CNC Vertical Machine Center  employs high speed spindle, linear ways on three axes and rigid machine structure. When it comes to precision parts, mold and 3C parts machining , the PRIMERO high speed CNC Vertical Machine Center is your only choice.

Optimal Structure Design high Rigidity! Lifetime Stability!

Increased width on the column bottom with box-type structure provides maximum stability especially when performing high speed cutting.

Linear ways on three axes assure high feed rates and extremely smooth motion.Extra wide span between linear ways greatly increases machine stability.

• Choice of 8,000. 10,000.12,000 or 15,000 rpm high speed machining requirement.
• High precision class C3 ball screws feature outstanding vibration dampening capability for high speed machining.
• Extra wide column bottom and base ensure superior stability during high speed machining.
• Compacted and simplified machine structure for space saving .
• Increased Y-axistravel for increasing working capacity(models JHV-1300/1500)

Finite Element Analysis

• The structural parts on Primero machine are analyzed and designed by the advanced Finite Element Analysis. It provides a detailed analysis for structural stress/strain conditions, and ensures excellent machine rigidity and lifetime stability.
  

  

Linear Guide Way

• The machine employs 45 mm. wide ball-type linear guide ways.

Precision Ball Screw

• Three axes are transmitted by high precision ball screws, preloaded ,hardened and ground-assuring dependable feed accuracy.

PL-1840/PL-1860

PL-2140/PL-2160

PL-2660/PL-2680/PL-26120

PL-3060/PL-3080/PL-30120

PL-3560 / 3580/ 35120

KM-80，KM-100

KM-120，KM-150，KM-158

KM-170，KM-200

KM-220

Features

• Extra wide base slideways combined with narrowway of straightness guide, ensuring high accuracyThe three axes employ high precision ball screws for maximum feeding accuracy.
• The slideways X, Y ,Z axis are hardened. The table surface is heat treated. The T-slots are precision ground , ensuring high accuracy and rigidity on table.
• The slideways are coated with Turcite-B for extremely smooth trraverse.
• HTD timing belt provides high torque transmission effect.
• The accurate counter-balance weight ensures service lift of ball screw and machining accuracy.An addition lifting hole prevent column from collision while in transportaton.
• The surface accuracy is precisely inspected by a laser system.

High Precision Spindle

P4 class high speed angular contact ball bearing offers superioraxial thrust capability.

The long nose spindle allows for machining workpiece cavity without bumping against the workplace

Laser inspecttion

The adavanced laser unit is employed to check the linear accuracy

Double nuts ballscrew

High precision ballscrews are pre-load to ensure accuracy andreduce thermal deflection.

Optional Aecessory

		Chip cleaner Chip clean system to wash chips to the chip pan

		Geneva tape ATC 16-tools armless upgrades efficiency greatly.

		4th axis CNC rotary table

CNC Milling Machine

SPECIFICATIONS

CNC Milling Machine

SPECIFICATIONS

CNC Milling Machine

SPECIFICATIONS

CNC Milling Machine

SPECIFICATIONS

→Booth No.N626←

Profile

Primero Machine Tools Corp. specializes in designing and manufacturing quality CNC Milling machines, CNC Vertical Machining Center and CNC Lathes. At Primero Machine Tools Corp. we realize that a major component of our business relies on expertise. Each machine is built with innovative design, strict assembling and quality processes. Today we have got achievement of excellence in all aspects.

We offer our customers’ innovative manufacturing ideas and technologies and are constantly aware of our customers changing needs and requirements. We provide expert advice and technical assistant when you need it. Our knowledgeable service staff provides quality service with a fast response and swift analysis of your need.

Base on CE, we have always paid much attention to Quality Control of products since our company founded. We inspect each parts and assembly of each machine strictly according to the drawing in each stage from design. All PRIMERO machines are in compliance with CE & EMC regulations. So many domestic and oversea customers like to use our products very much.

At PRIMERO, we set our standard high. We use these high standards to define our goals and work hard to achieve our goal. To find out how we can help you achieve your goals, please contact with our local dealer for futher information. PRIMERO always at your service.

PRIMERO MACHINE TOOLS CORP

No.158, Yuan Huan South Road, Feng Yuan City,

Talchung Hsien, Taiwan

TEL: +886-4-2515-6651 http://www.primero.com.tw

FAX:+886-4-2515-6657 E-mail:  primero@seed.net.tw